Would you like to see our samples before ordering?
NAME
EMAIL
WHAT YOU WANT
Get Free Sample
Laminate flooring manufacturers introduce the floor laying process
 Sep 13, 2021|View:550

Laminate flooring is wear-resistant and has a long service life, so most owners can freely choose this type of flooring when decorating. However, the quality of the floor installation directly affects our daily use. Then, the laminate flooring manufacturer tells you how accurate it should be To install laminate flooring?


Laminate laminate flooring steps:

4.jpg

11.jpg

Grassroots cleaning

The debris and dust on the surface of the base layer must be cleaned up, and the base layer should be kept dry and clean.


22.jpg

Floor mats

The base surface shall be covered with cushion stones, or pave stones with stones, and the joints shall not overlap. Adhesive tape can also be used at the joints, and a gap of 10~12mm should be left between the pad and the wall.


3.jpg

33.jpg

Pave the floor

When you buy the floor, the laminate flooring manufacturer will tell you that the paving of laminate flooring can start from a random place and no direction is allowed. Sometimes there should be a notch on the side where the composite floor is installed, which should be close to the wall and the floor, and a gap of 10 to 12 mm should be left and inserted into the gap of the same thickness. The end plate below the first row can be used to add the first piece of the second row of floor slabs. The last row of floors is usually narrower than the other floors. Align the final stone floor and the edge of the paved floor with the distance between the wall and the wall. After sawing off the excess part, add a gap of 8-12mm. Use the return hook to put the final stone slab into the last row and fasten it.


44.jpg

Install skirting

Fill up the top of the skirting line first, and pop the wall thickness line of the skirting line on the floor surface. ) Nail the skirting line up and down to the wooden bricks embedded in the wall. It must be noted that the embedded anticorrosive wood bricks on the wall should make the wall eye-catching and flush with the painted surface.


The above is the introduction of laminate flooring manufacturers on the laying process of laminate flooring. If you have more questions about laminate flooring, you can contact us at any time.


View More(Total0)Comment lists
No Comment
I want to comment
Content*
Verification code*
  
CopyRight © 2024 Changzhou Richwood Decorative Material Co.,Ltd.  All rights reserved  Designed by Zhonghuan Internet   Sitemap  All tags