Base treatment: the base is unleveled, leveled with cement mortar, and then laid down the bathroom laminate flooring. The base needs to be sand-free, leather-free, ash-free, barrel-free, oil-free, non-rough surface. If the requirements are not met, the ground should be dealt with first. Bathroom laminate flooring is usually done by cleaning the dirt and debris off the floor with a broom.

Determine the direction: determine the direction of the laying of the floor, the general direction of the south of the room, mainly the north-south direction, that is, the direction of the floor vertical sunlight into the north-south direction is the most common direction of laying.

Damp-proof mat: use a 1.5-thick damp-proof mat to insulate the floor from moisture and prevent bathroom laminate flooring from deforming due to moisture.

Cushion insulation layer: wood keel spacing is generally 400mm, the middle insulation layer to reduce people walking time and space drum, improve insulation effect. The back surface of the base layer and the insulating layer is coated with glue at the same time, and the glue surface can be stuck when it is not stuck.

Laying the floor: first lay the linings. In the adjusted wood keel, the thickness of the nail linings is more than 2.5 times the thickness of the linings, leaving a 2mm gap between the adjacent linings. Then, the wall-side pieces should leave a 10 mm gap in the wall surface, then be lined up one by one, and nailed obliquely from the recesses of the floor with ground nails, smashing the nail caps flat, and nailing the bathroom laminate flooring side by side.