Log selection and division

Good wood can produce good floors in the production process of laminate flooring, and the quality of logs has a very important impact on the quality of the floor. The quality control of a good brand starts with the selection of logs. Good wood is the basis for the production of high-quality flooring.

Log peeling and drying

This process is used to process and manufacture the solid wood core board of the laminate flooring base material. The quality of the base material solid wood core board is inseparable from the finished floor. The thickness of the wood core is about 1.5 mm after the peeling, and it takes a period of time to dry after the peeling.

Solid wood core board sorting

To ensure the quality of each layer, the production process of laminate flooring is normal, even manufacturers usually only choose thin, thick, moderate thickness, solid wood core board, no defects, no breaks as the floor substrate, and the full-time selection member selects the floor substrate.

The core board is coated with glue

The operation of professional gluing equipment can ensure the uniformity of the gluing amount and improve the gluing efficiency. 8-10 glued thin solid wood core boards are arranged in orderly staggered layers and bonded together, which can change the original extension direction of wood fibers. It is this step that completely improved the shrinkage limit of the solid wood wet bilge.

Hot pressing and gluing of core board

Hot pressing is an important process in the production process of solid wood composite flooring, and it is directly related to the quality of the finished floor in the production process of laminate flooring. Large factories use more advanced hot pressing equipment, and production management personnel monitor the whole process, so the product quality is relatively stable.

Base material fixed thickness sanding

Sanding the surface and bottom materials of the floor with a large fixed-thickness sander can ensure the flatness and smoothness of the board surface to improve the accuracy of the product and provide a reliable guarantee for the urgent and precious tree species veneer surface decoration.

Substrate sorting and health preservation

After the initial processing of the floor substrate is completed, it must be carefully selected by a dedicated person to remove the unqualified products. After high temperature and high pressure, there is a large internal stress inside the substrate, and it needs to be balanced for 15 to 20 days to release this internal stress and make the substrate reach equilibrium and stability. This process is called health preservation.

Selection of solid wood veneer

‍

Multi-layer solid wood laminate flooring is usually used in the dry environment in the north, so dimensional stability is very important. In the production process of laminate flooring, in order to prevent cracking in the dry heating season, the precious wood veneer planted on the surface of the big brand solid wood composite flooring is selected by professional quality inspectors, and the moisture content control is extremely strict.

Floor slab forming

The selected single wood veneer is coated with environmentally friendly glue, pasted on the floor substrate, and then entered into an advanced hot press for hot pressing to form a qualified multi-layer solid wood composite board.

Floor slab curing

Since the decorative veneer of the floor substrate is hot-pressed, a large internal stress is generated inside the board. This kind of floor requires a healthy warehouse with a constant temperature and humidity balance in about 20 days to ensure that the quality of the floor is more stable.

Floor cutting and grooving

After the heat preservation, the slab is cut into shape with slotting equipment. The quality of the slotting is of great significance to the splicing of the finished floor. Therefore, large domestic enterprises have introduced cutting equipment imported from Germany to ensure the quality.

Spray paint, dry and finalize

The slotted floor will go through painting equipment. After 8 primer and 4 top paint are sprayed, the top paint surface of the finished floor will be wet and full of toughness. After that, only need to arrange the packaging to end the whole process of laminate flooring production.